کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8057204 1520053 2018 16 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The crack detection and evaluation by elastic wave propagation in open hole structures for aerospace application
ترجمه فارسی عنوان
تشخیص و ارزیابی ترک خوردگی توسط انتشار موج انعطاف پذیر در ساختارهای سوراخ باز برای کاربرد هوا فضا
کلمات کلیدی
ورق با سوراخ، آلیاژ آلومینیوم، امواج الاستیک، مبدلهای پیزوالکتریک، شناسایی آسیب، برآورد طول کرک، شبیه سازی عنصر محدود،
ترجمه چکیده
ورق مستطیلی ساخته شده از آلیاژ آلومینیوم با یک سوراخ نسبتا بزرگ دایره ای در مرکز هندسی ساختار تحت فشار قرار گرفته است. این بارگیری باعث می شود که در مجاورت یک سوراخ روند ایجاد ترک ایجاد شود. ترکیب با استفاده از روش انتشار ویژه الایزا شناسایی و ارزیابی می شود. فعال کننده پیزوالکتریک به طور مستقیم بر روی لبه سوراخ قرار دارد و بقیه حسگرها در فاصله مساوی از آداپتور قرار می گیرند. ترکیب با مقایسه مرجع، بدست آمده برای صفحه ناپیوسته و سیگنال واقعی (اندازه گیری پگ) تشخیص داده می شود. اندازه گیری میزان آسیب مناسب پیشنهاد شده است. علاوه بر این، سیستم، که بدون آگاهی از یک ساختار ناقص کار می کند، نیز مورد بحث قرار گرفته است. به منظور برآورد و تجسم طول کرک، تصویربرداری پیشرفته تشخیصی معرفی شده است. روش کاربردی براساس تجسم مسیرهای سنجش با یک مقدار تعیین شده از ضرایب همبستگی، محاسبه شده برای سیگنال مرجع و واقعی است. اثربخشی سیستم توصیف شده با استفاده از شبیه سازی عددی و آزمایش تجربی تأیید شده است. تجزیه و تحلیل نظری با استفاده از روش المان محدود انجام می شود. محاسبات برای چند طول گمانه ای از ترک ها انجام می شود. نتایج نظری حاصل شده و همچنین تجزیه و تحلیل تجربی، این واقعیت را ثابت می کند که ترک در مرحله اولیه تشکیل تشخیص داده می شود. علاوه بر این، یک توافق نسبتا خوب بین طول کرک واقعی و آنچه که با استفاده از روش پیشنهادی حاصل شده است، در تحلیل عددی و همچنین در آزمایش دیده می شود.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی هوافضا
چکیده انگلیسی
The rectangular plate made of aluminum alloy with a relatively large circular hole in the geometrical center of the structure is subjected to uniform tension. This loading causes that in the vicinity of a hole a process of crack formation is triggered. The crack is detected and evaluated with the use of elastic wave propagation method. The piezoelectric activator is located directly on the edge of the hole and the rest of sensors are placed at an equal distance from the activator. The crack is detected by comparison of the reference, obtained for the intact plate, and the actual signal (pitch-catch measurement). The appropriate damage magnitude measurement is proposed. Moreover, the system, which works without knowledge of an intact structure, is also discussed. In order to estimate and visualize the length of a crack, the advanced diagnostic imaging is introduced. The applied method is based on a visualization of sensing paths with an assigned value of correlation coefficients, computed for reference and actual signals. The effectiveness of the described system is verified with the use of numerical simulation and experimental test. The theoretical analysis is carried out with the use of the finite element method. The computations are performed for several assumed lengths of cracks. The obtained theoretical results, as well as the experimental analysis, confirm the fact that the crack can be detected at an early stage of formation. Moreover, a relatively good agreement between the real crack lengths and the ones obtained with the use of the proposed method is observed in the numerical analysis as well as in the experiment.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Aerospace Science and Technology - Volume 81, October 2018, Pages 141-156
نویسندگان
, ,