کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8062208 | 1520629 | 2018 | 17 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Vertical holding capacity of torpedo anchors in underwater cohesive soils
ترجمه فارسی عنوان
ظرفیت نگهداری عمودی لنگرگاه های اژدر در خاک های تثبیت شده زیر آب
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
لنگر توربو نیروی کششی، ظرفیت خروجی عمودی، خاک مخلوط، عمق جاسازی شده،
ترجمه چکیده
پیچ لنگرهای توربوسی به عنوان یکی از مؤثرترین راه حل های مجهز برای سیستم های تله تله شناخته شده اند و می توانند بارهای عمودی را تحمل کنند. برآورد ظرفیت خروج غیرقابل نفوذ لنگرها برای طراحی امکانات شناور دریایی بسیار مهم است. برخی از دستاوردهای محاسبه ظرفیت برگزاری لنگرگاه های اژدر با استفاده از آزمایش های میدانی، آزمایش های مدل متعارف تحت یک گرانش، آزمایش های سانتریفیوژ با ارزش بالا شتاب گرانشی و آزمایش های عددی به دست آمده است. با این حال، یک فرمول ساده و قابل اعتماد هنوز برای محاسبه ظرفیت نگهداری یک لنگر اژدر مورد نیاز است. در این مطالعه 240 مجموعه آزمایش های آزمایشگاهی انجام شد و 11 پیچ و خم مدل مدل عمودی در یک تخت رسوبی نرم، عمودی از انواع مختلف خاک های همجواری و عمق تعادلی مختلف کشیدند. خصوصیات منحنی بارگیری مورد تجزیه و تحلیل قرار گرفت و رابطه بین ظرفیت خروجی و خواص لنگر و انواع خاک بررسی شد. بر اساس تجزیه و تحلیل نیروی و داده های آزمایشگاهی، یک فرمول برای محاسبه ظرفیت نگه دارنده ی مونوونیون غوطه ور یک لنگر اژدر پیشنهاد شده است که عمدتا به عمق جاذب لنگر، وزن خالص، هندسه و خواص خاک بستگی دارد. ظرفیت برگزاری عمودی محاسبه شده با دادههای آزمایشگاهی و میدانی که توسط نویسندگان و سایر دانشمندان به دست آمد، سازگار بود.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی دریا (اقیانوس)
چکیده انگلیسی
Torpedo anchors are regarded as one of the most efficient mooring solutions for taut mooring systems and can withstand vertical loads. The estimation of the undrained pullout capacity of the anchors is vital for the design of offshore floating facilities. There have been some achievements obtained for the calculation of the holding capacity of a torpedo anchor via field tests, conventional model tests under one gravity, centrifuge tests with a high value of gravity acceleration and numerical tests. However, a simple and reliable formula is still required to calculate the holding capacity of a torpedo anchor. In this study, 240 sets of laboratory tests were performed, and 11 differently shaped model anchors, vertically embedded in a soft sedimentary bed, were pulled out vertically from different types of cohesive soils and different embedment depths. The characteristics of the loading curves were analyzed, and the relationship between the pullout capacities and properties of the anchors and types of soils were investigated. Based on force analysis and the laboratory data, a formula was proposed for the calculation of the undrained monotonic holding capacity of a torpedo anchor, which mainly depends on the embedded depth of the anchor, net weight, geometry, and in situ soil properties. The calculated vertical holding capacities were consistent with the laboratory and field data obtained by the authors and other scientists.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ocean Engineering - Volume 161, 1 August 2018, Pages 291-307
Journal: Ocean Engineering - Volume 161, 1 August 2018, Pages 291-307
نویسندگان
Wenkai Wang, Xuefeng Wang, Guoliang Yu,