کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8068232 1521113 2015 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Theoretical calculation of the characteristics of annular flow in a rectangular narrow channel
ترجمه فارسی عنوان
محاسبه تئوری ویژگی های جریان حلقوی در یک کانال باریک مستطیلی
کلمات کلیدی
مدل جریان گرانشی، ضریب انتقال گرما جوش، گرادیان فشار، ضخامت فیلم مایع مشخصات سرعت
ترجمه چکیده
یک مدل جریان مجازی ریاضی توسعه یافته است که به جریان دو فاز حلقوی در کانال های باریک مستطیلی با حرارت محیطی قابل استفاده است. مدل جریان چرخشی نظری بر اساس اصول حفاظت اساسی است: معادلات جرم، حرکتی و حفاظت انرژی فیلم مایع و معادله ذخیره سازی حرکتی هسته بخار. از طریق حل عددی معادلات بسته، ضریب انتقال گرما، گرادیان فشار محوری، ضخامت فیلم مایع و پروفیل سرعت در فیلم مایع بدست می آید. توافق خوب با مقایسه داده های تجربی و نتایج پیش بینی شده ی نظری پیدا شده است. ضخامت فیلم مایع با افزایش شار حرارتی و عرض کانال کاهش می یابد، در حالی که با افزایش سرعت جریان و ارتفاع کانال افزایش می یابد. پروفیل سرعت در فیلم مایع خطی نیست وقتی که ضخامت فیلم مایع بسیار نازک نیست و با افزایش شار گرما افزایش می یابد، در حالی که با افزایش جریان جرم و اندازه کانال کاهش می یابد. اثر شار حرارتی و عرض کانال در سرعت در فیلم مایع بزرگتر از جریان جرم است. سرعت فیلم در فیلم مایع به سمت خطی می رود، زمانی که فیلم مایع به طور عمده در لایه مرزی لمینار است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
چکیده انگلیسی
A mathematical separated flow model has been developed that is applicable to the annular two-phase flow in the rectangular narrow channels with peripheral heating. The theoretical annular flow model is based on the fundamental conservation principles: the mass, momentum and energy conservation equations of liquid film, and the momentum conservation equation of the vapor core. Through numerically solving the closed equations, boiling heat transfer coefficient, axial pressure gradient, liquid film thickness and velocity profiles in the liquid film are obtained. A good agreement has been found through comparing the experimental data and theoretically predicted results. The liquid film thickness will decrease with the increase of heat flux and channel width, while increases with increasing flow rate and channel height. The velocity profile in the liquid film is not linear when the thickness of the liquid film is not very thin and it increases with increasing heat flux, while decreases with the increase of mass flow rate and channel size. The effects of heat flux and channel width on velocity in the liquid film are larger than that of mass flow rate. The velocity in liquid film tends towards linear, when the liquid film is mainly in the laminar boundary layer.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Annals of Nuclear Energy - Volume 85, November 2015, Pages 259-270
نویسندگان
, , , , , ,