کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8088653 1521897 2018 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Study on the influence of the identification model on the accuracy of the thermal response test
ترجمه فارسی عنوان
بررسی اثر مدل شناسایی بر روی دقت آزمون حرارتی
کلمات کلیدی
آزمون پاسخ حرارتی، پارامترهای حرارتی خاک، شناسایی پارامتر، مدل منابع حرارتی خطی، مدل منبع حرارت گرمایشی،
ترجمه چکیده
یک مدل انتقال گرمای عددی سهبعدی از تست واکنش حرارتی پمپ حرارتی زمین در این مقاله و با تست تأیید شده است. مدل عددی برای شبیه سازی آزمون پاسخ حرارتی استفاده می شود. پارامترهای حرارتی فیزیکی خاک بر اساس منبع حرارتی استوانه ای و تئوری منبع گرمای خطی برآورد شده و با مقادیر تنظیم شده در مدل انتقال گرمای عددی مقایسه می شود. اثر مدل شناسایی پاسخ حرارتی در محل بر روی دقت نتایج شناسایی تحت خواص حرارتی مختلف خاک مورد مطالعه قرار گرفته است. نتایج نشان می دهد که زمان مطلوب برای شناسایی پارامترهای فیزیکی فیزیکی خاک بر اساس دو مدل وجود دارد. شناسایی پارامترهای فیزیکی در نقاط زمان غیر بهینه، یک خطای بزرگ ایجاد می کند. در شرایط مشابه، زمان شناسایی مطلوب از مدل منبع حرارت استوانه ای قبل از مدل منبع حرارت حرارتی است و همچنین به خواص فیزیکی خاک بستگی دارد. بنابراین زمان آزمون باید برای اطمینان از صحت نتایج انتخاب شود. علاوه بر این، هیچ تاثیر واضحی از درجه حرارت اولیه اولیه بر دقت شناسایی دو مدل وجود ندارد. این مقاله مرجع برای بهبود تست واکنش حرارتی پمپ های گرمای منبع زمین است.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات ژئوشیمی و پترولوژی
چکیده انگلیسی
A 3-D numerical heat transfer model of a ground-source heat pump thermal response test is established in this paper and verified by testing. The numerical model is used to simulate the thermal response test. The soil thermo-physical parameters are estimated based on the cylindrical heat source and the linear heat source theory and contrasted with the values setting in the numerical heat transfer model. The effect of the identification model of the in-situ thermal response on the accuracy of the identification results is studied under different soil thermal properties. The results show that there is an optimal time to identify the soil thermo-physical parameters based on the two models. Identifying the physical parameters at the non-optimal time points will produce a large error. Under the same conditions, the optimal identification time of the cylindrical heat source model is earlier than that of the linear heat source model and is also related to the soil physical properties. Therefore, the test time should be selected to ensure the accuracy of the results. Furthermore, there is no evident influence of the initial soil temperature on the identification accuracy of the two models. This paper offers a reference for improving the thermal response test of ground source heat pumps.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Geothermics - Volume 72, March 2018, Pages 316-322
نویسندگان
, , , , , , ,