کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8124320 1522770 2018 37 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Static Young's modulus model prediction for formation evaluation
ترجمه فارسی عنوان
پیش بینی مدل مدول استاتیک یانگ برای ارزیابی شکل گیری
کلمات کلیدی
مدول یانگ، زمین شناسی مخزن حفاری، خصوصیات سازندگی،
ترجمه چکیده
برآورد دقیق خواص مکانیکی سنگ مانند مدول جوان استاتیک برای کاهش خطرات ناشی از فعالیت های اکتشافی و تولید، حیاتی است. در حالت ایده آل، تعیین مدول سنگ راکت، نیازمند مطالعات تجربی است که بر اساس اطلاعات اصلی گرفته شده از سازه های مورد نظر انجام می شود. هنگامی که داده های هسته ای در دسترس نیستند (احتمالا به دلایل اقتصادی)، مدول استاتیک یانگ اغلب از مدول پویا یانگ با استفاده از روابط تجربی برآورد می شود، چون مدول پویای یانگ به راحتی می تواند از داده های پتروفیزیکی بدست آید. بالاتر از تخلخل تشکیل، بیشتر تفاوت بین مدول یاتاقان استاتیک و پویا یانگ است. روابط تجربی موجود، مشخصه سنگ شناسی است و از نظر محدوده تخلخل مناسب است. بنابراین، تعمیم این روابط ممکن است نتایج نامناسبی را ایجاد کند. برای مقابله با خطوط مختلف و غلظت تخلخل، یک رابطه جدید بین مدول استاتیک و پویای یانگ پیشنهاد شده است. مدل جدید شامل پارامتر وابسته به سنگ شناسی-تخلخل است. این مدل صرفا تجربی است، بر اساس تجزیه و تحلیل داده های آزمایشگاهی گسترده ای که از ادبیات به دست آمده است. سپس با مقایسه روابط موجود با استفاده از تحلیل آماری، مقایسه مقایسه می شود. نتایج نشان می دهد که مدل جدید پیشنهاد شده بهتر از مدل های قبلا تاسیس شده است.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات زمین شناسی اقتصادی
چکیده انگلیسی
Accurate estimation of rock mechanical properties such as the static Young modulus is critical to reduce the risks associated with exploration and production activities. Ideally, the determination of the rock static Young's modulus will require experimental studies to be conducted on core data taken from the formations of interest. When core data are not available (possibly due to economic reasons), the static Young's modulus is often estimated from the dynamic Young's modulus using empirical relationships, since the dynamic Young's modulus can easily be obtained from the petrophysical data. The higher the formation porosity, the greater the difference between the static and dynamic Young's modulus. The existing empirical relationships are lithology specific and they are suitable over the porosity range from which they have been derived. Therefore, the generalization of these relationships may produce erroneous results. To be applicable to various lithologies and porosity ranges, a new relationship between the static and dynamic Young's modulus is being proposed. The new model incorporates a lithology-porosity dependent parameter. The model is purely empirical, based on the analysis of extensive laboratory data obtained from the literature. Comparisons are then made with the existing relations using statistical analysis. The results show that the newly proposed model outperforms all previously established models.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Petroleum Science and Engineering - Volume 171, December 2018, Pages 394-402
نویسندگان
, , , , , ,