کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8125446 | 1522779 | 2018 | 36 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Parametric optimization of vector well patterns for hydraulically fractured horizontal wells in tight sandstone reservoirs
ترجمه فارسی عنوان
بهینه سازی پارامتریک الگوهای چاه بردار برای چاه افقی شکستگی هیدرولیکی در مخازن چگال ماسه سنگ
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
مخازن تنگ ماسه سنگ، چاه افقی شکسته، الگو برداری وکتور بهینه سازی پارامتریک،
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
زمین شناسی اقتصادی
چکیده انگلیسی
In this paper, a generalized and pragmatic framework has been developed to optimize the vector well pattern in tight sandstone reservoirs. More specifically, the maximum principal formation stress, natural fracture orientation, and principal permeability orientation are identified as the three key factors associated with well productivity, while both micro-elements of fractures are summed up and coefficients of the same fracture are combined according to the angle between the principal permeability orientation and direction of the hydraulic fractures to form an equation matrix. The sensitivity analysis is then conducted to examine effect of the maximum horizontal principal stress and the principal permeability on horizontal well production while determining the optimal orientation of the horizontal wellbore. Subsequently, theoretical calculation is performed to design and optimize the well pattern as well as fracture properties. It is found that the orientation of a horizontal wellbore should be perpendicular to the direction of the maximum horizontal principal stress if the angle (θ) between the orientation of the principal permeability kx and the direction of the maximum horizontal principal stress is less than 30°. If 30°â¤Î¸â¤60°, the orientation of the horizontal wellbore should be perpendicular to the direction of the maximum horizontal principal stress for a weak anisotropic reservoir kx/ky<2, while it should be perpendicular to the orientation of principal permeability kx for a strong anisotropic reservoir kx/kyâ¥2. The orientation of a horizontal wellbore needs to be perpendicular to the orientation of the principal permeability (kx) if 60°â¤Î¸â¤90°. In addition to improving the recovery factor compared with that of the conventional well spacing, it is found from a field application that the optimized vector well pattern can effectively extend the stable production period, reduce water-cut, increase oil recovery up to 4.5%, and improve the overall reservoir performance.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Petroleum Science and Engineering - Volume 162, March 2018, Pages 469-479
Journal: Journal of Petroleum Science and Engineering - Volume 162, March 2018, Pages 469-479
نویسندگان
Leng Tian, Daoyong Yang, Sixu Zheng, Bo Feng,