Pt nanoflower/polyaniline composite nanofibers based urea biosensor

Hybrid materials with special structures are of great interest because of their superior properties compared with their pure counterparts. Hybrid polyaniline (PANi) nanofibers with integrated Pt nanoflowers are studied in this research. PANi is prepared by in situ polymerization of aniline on an electrospun nanofiber template in an acidic solution with ammonium persulfate (APS) as the oxidant. Pt nanoflowers are further electrodeposited onto the PANi nanofibers backbone by cyclic voltammetry (CV), resulting in novel functionalized hybrid nanofibers. The coverage of Pt nanoflowers on PANi nanofibers can be facilely controlled by adjusting the electrodeposition conditions. The factors affecting Pt nanoflowers formation are further investigated. As a demonstration, urease is immobilized onto the Pt/PANi hybrid nanofibers and the composite was employed as the sensing platform for urea detection in a flow-injection-analysis (FIA) system. The detection of urea shows a wide linear range (up to 20 mM), a good limit of detection of 10 μM (S/N = 3), and an excellent anti-interference property against chloride ion. In addition, it was found that the response to urea was attributed not only to the conductivity change of PANi due to the interaction between PANi and ammonia (liberated from the enzymatic reaction), but also to the interaction between Pt nanoflowers and amine groups in urea. The strategy developed in this study can be extended to synthesize other composite nanofibers consisting of conducting polymer and metal nanoparticles for a wide range of sensing applications.

► Pt nanoflowers were electrodeposited on PANi nanofibers.
► PANi-Pt nanoflower nanofibers as novel sensing material.
► Urease modified hybrid nanofibers for sensitive urea detection.