Electrochemical detection of point mutation based on surface ligation reaction and biometallization

A highly sensitive electrochemical method for point mutation detection based on surface enzymatic ligation reaction and biometallization is demonstrated. In this method the surface-immobilized allele-specific probe, complementary to the mutant target, undergoes allele-specific ligation with the 5′-phosphorylated ligation probe in the presence of the mutant oligonucleotide target and E. coli DNA ligase. If there is an allele mismatch, no ligation takes place. After thermal treatment at 90 °C, the formed duplex melts apart, which merely allows the ligation product to remain on the electrode surface. Then, biotinylated detection probes hybridize with the ligation product. With the binding of streptavidin-alkaline phosphatase (SA-ALP) to the biotinylated probes, a non-reductive substrate of alkaline phosphatase, ascorbic acid 2-phosphate (AA-P), can be converted into ascorbic acid (AA) at the electrode surface. Silver ions in solution are then reduced by AA, resulting in the deposition of silver metal onto the electrode surface. Linear sweep voltammetry (LSV) is used to detect the amount of deposited silver. The proposed approach has been successfully implemented for the identification of single base mutation in codon 12 of K-ras oncogene target with a detection limit of 80 fM, demonstrating that this method provides a highly specific, sensitive and cost-efficient approach for point mutation detection.