DNA microarrays on silicon nanostructures: Optimization of the multilayer stack for fluorescence detection

To improve the sensitivity of fluorescence detection in DNA microarrays, the use of silicon nanostructures based on chemical vapor deposition (CVD) processes adopted for the growth of rough polycrystalline silicon was investigated. These substrates present advantages of two main properties which could lead to an enhancement of the fluorescence detection, i.e. (i) the increase of the available surface area in order to achieve a high loading capacity of biomolecules and (ii) the optimization of the stack of silicon nanostructures support. Indeed, the structures were elaborated on an initial thermal oxide layer and then covered with a silicon oxide layer, obtained by oxidation and allowing the functionalization for the subsequent grafting of DNA probes. Moreover, these oxide layers play a part in the fluorescence detection. The influence of the silicon oxide layer thickness above and below the silicon grains in close relation with the density of nanostructures on the emitted fluorescence was emphasized. This paper presents an experimental characterization of the fluorescence intensity and the optimization of the different layers that composed the substrate used for DNA microarrays. The performances of the microarrays were investigated by means of hybridization experiments using complementary fluorescent labeled-oligonucleotides targets. Our results indicate that an optimized substrate can be designed and that the use of oxidized silicon nanostructures for support of biochip could be a strategy for improving the sensitivity of fluorescence detection.