Calibration of nationwide airborne laser scanning based stem volume models

In-situ field measurements of sample plots are a major cost component in airborne laser scanning (ALS) based forest inventories. Field measurements on new inventory areas can be reduced by utilizing existing stand attribute models from former inventory areas. We constructed a nationwide model for stem volume, and examined seven different calibration scenarios using 22 inventory areas distributed evenly throughout Finland. These scenarios can be divided into three main categories: 1) calibration with additional predictor variables, 2) calibration with 200 geographically nearest sample plots, and 3) calibration with MS-NFI (Multi-source National Forest Inventory of Finland) volume at the target inventory area. Calibration with degree days, precipitation, and proportion of birch resulted in the greatest decrease in error rate of stem volume predictions. The mean of the root mean square errors (RMSE) among the 22 inventory areas decreased from 28.6% to 25.9%, and the standard deviation of RMSEs from 4.3% to 3.9% using three additional predictor variables. Correspondingly, the mean and standard deviation of absolute values of mean differences (|MD|) decreased from 8.3% to 5.6% and from 5.6% to 4.4%, respectively. All calibration scenarios decreased the error rate, especially the high |MDs| observed in the northern part of Finland. Calibration with sample plots from geographically nearest inventory areas was useful when there were sample plots that offered a good representation of the target area. MS-NFI based calibration was also a reasonable option if loggings and other inconsistencies between datasets could be detected and accounted for.