Experimental investigations on the effects of ambient freeze-thaw cycling on dynamic properties and rock pore structure deterioration of sandstone

The issue of rock pore structure deterioration and dynamical mechanical properties has drawn much attention in recent years in the rock engineering community. In this study, a series of 140 freeze-thaw cycling tests are conducted on sandstone samples. The sandstone pore structure after freeze-thaw cycles was detected by Nuclear Magnetic Resonance (NMR), and the dynamic load test was carried out by Split Hopkinson Pressure Bar system (SHPB). The results are: with the increase of freeze-thaw cycles, the saturated mass and porosity of sandstone increase, the dynamic peak stress of sandstone decreases; while the peak strain and total strain increase gradually, and the macroscopic damages of rocks increase. The results of T2 distribution and pore size changes are that the pore sizes of sandstones increase, especially that of micro-pores and macro-pores increase obviously after 140 freeze-thaw cycles. Under the effect of freeze-thaw cycles, the sandstone pores become connected with each other, some of the micro-pores and mini-pores are changed into meso-pores and macro-pores. The number of marco-pores increases evidently, and the largest increase is 197.23%. The rock pore structures have changed, which would lead to the change of mechanic properties. As the number of freeze-thaw cycles increases, the rock dynamical peak stress gradually decreases and the peak strain and the overall strain increase gradually.