کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8961442 | 1646493 | 2018 | 38 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
APT-studies of phase formation features in VVER-440 RPV weld and base metal in irradiation-annealing cycles
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی هسته ای و مهندسی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
It is shown that primary and re-irradiation is accompanied by formation of radiation-induced Cu-P-based precipitates whereas recovery annealing leads to their partial dissolution and coarsening of the undissolved ones. At this, for both WM and BM under primary annealing, Cu dissolves in the matrix, while under re-annealing Cu almost doesn't return to the matrix. In WM P fully dissolves in the matrix under annealing while in BM there is gradual matrix P depletion under operation (including recovery annealing) due to formation of P grain boundary segregation. Under the third irradiation cycle, Cu almost doesn't contribute to precipitation: in WM radiation-induced precipitates are P-based, enriched with Si, Ni and Mn, while in BM there are Si-based precipitates, enriched with Ni and Mn. In BM number density of precipitates is lower than in WM during all operation stages that causes its lower radiation embrittlement.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Nuclear Materials - Volume 511, 1 December 2018, Pages 30-42
Journal: Journal of Nuclear Materials - Volume 511, 1 December 2018, Pages 30-42
نویسندگان
S.V. Fedotova, E.A. Kuleshova, B.A. Gurovich, A.S. Frolov, D.A. Maltsev, G.M. Zhuchkov, I.V. Fedotov,