کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9690322 | 1457225 | 2005 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Air-cooling induced from spinning of spin-casting moulds
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The quality of spin cast products and mould life are critically dependent on the thermal conditions they are exposed to. An investigation was carried out on the effect of air-cooling induced by the spinning of the mould and its consequences on the thermal process. A system was developed to optimise the thermal process during casting, utilising a theoretical analysis of the air-flow characteristics in a cooling tube submerged in a silicon mould and the characteristics of convection heat transfer associated with the mould and cast part. A numerical simulation of the casting process was also used in this process. The effect of the developed system on the thermal process was determined experimentally and it was found that a system of air-cooling, automatically induced from the spinning of the mould, is feasible in optimization of the thermal process.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 25, Issues 8â9, June 2005, Pages 1183-1194
Journal: Applied Thermal Engineering - Volume 25, Issues 8â9, June 2005, Pages 1183-1194
نویسندگان
Zhongjie Huan, G.D. Jordaan,