کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9795771 | 1514934 | 2005 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Processing and microstructure of TiNi SMA strips prepared by cold roll-bonding and annealing of multilayer
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Processing and microstructure of TiNi SMA strips prepared by cold roll-bonding and annealing of multilayer Processing and microstructure of TiNi SMA strips prepared by cold roll-bonding and annealing of multilayer](/preview/png/9795771.png)
چکیده انگلیسی
The preparation of TiNi SMA thin strip via cold roll-bonding and subsequent annealing treatment of pure Ti/Ni multilayer has been studied. The relationships between processing variables and microstructure formed based on the proposed method have been investigated by OM, SEM/EDS and XRD detections. It shows that the Ti/Ni multilayer with reduction of 97% can be possibly obtained by cold rolling of initially hot-press bonded pure Ti and Ni foils. Within the high thickness reduction of the multilayer, the TiNi phase is easily formed at relatively low annealing temperature and short annealing time. DSC measurement for the prepared TiNi strip have shown a good B2 to B19Ⲡtransformation behaviour and Ms at around 60 °C, transition hysteresis of about 30 °C and transition enthalpy of average 24 J/g, which is similar to those by the conventional ingot-metallurgy method.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 408, Issues 1â2, 5 November 2005, Pages 182-189
Journal: Materials Science and Engineering: A - Volume 408, Issues 1â2, 5 November 2005, Pages 182-189
نویسندگان
Hong-Sheng Ding, Jung-Moo Lee, Bup-Ro Lee, Suk-Bong Kang, Tae-Hyun Nam,