Analysis of the stress intensity factor around corrosion pits developed on structures subjected to mixed loading Fulltext Access 4 Pages 2006
Mechanical memory metal: a novel material for developing morphing engineering structures Fulltext Access 4 Pages 2006
Phase field simulation of grain growth in three dimensional system containing finely dispersed second-phase particles Fulltext Access 4 Pages 2006
Stress-assisted reversible magnetic field-induced phase transformation in Ni2MnGa magnetic shape memory alloys Fulltext Access 4 Pages 2006
Tensile properties and fracture behavior of nanocrystalline Ni3Al intermetallic foil Fulltext Access 4 Pages 2006
The depth dependence of the indentation creep of polycrystalline gold at 300 K Fulltext Access 4 Pages 2006
The strength and hardness of cubic spinel SiAlON (c-Si6−zAlzOzN8−z, z = 1) Fulltext Access 4 Pages 2006
Formation of gas induced shrinkage porosity in Mg-alloy high-pressure die-castings Fulltext Access 4 Pages 2006
Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer Fulltext Access 4 Pages 2006
Innovative processing and property improvement of metallic glass based composites Fulltext Access 4 Pages 2006
Thermoelectric properties of Cu-doped p-type pseudo-binary CuxBi0.5Sb1.5−xTe3 (x = 0.05–0.4) alloys prepared by spark plasma sintering Fulltext Access 4 Pages 2006
Evidence of structure relaxation prior to nanocrystallization in an Al-based metallic glass Fulltext Access 4 Pages 2006
Interfacial reaction in steel–aluminum joints made by friction stir welding Fulltext Access 4 Pages 2006
Effect of strain rate and temperature on mechanical properties and fracture mode of high strength precipitation hardened ferritic steels Fulltext Access 4 Pages 2006
Synthesis and microstructure of tantalum carbide and carbon composite by liquid precursor route Fulltext Access 4 Pages 2006
Failure of brittle layers on polymeric substrates from Vickers indentation Fulltext Access 4 Pages 2006
Formation of μ phase during thermal exposure and its effect on the properties of K465 superalloy Fulltext Access 4 Pages 2006
Improvement of microstructure and property of cold-sprayed Cu–4 at.%Cr–2 at.%Nb alloy by heat treatment Fulltext Access 4 Pages 2006
A new Cu–Hf–Al ternary bulk metallic glass with high glass forming ability and ductility Fulltext Access 4 Pages 2006
Modelling of the evolution of stress corrosion cracks from corrosion pits Fulltext Access 4 Pages 2006
Fabrication of lotus-type porous carbon steel by unidirectional solidification in nitrogen atmosphere Fulltext Access 4 Pages 2006
Microstructural features induced by a high magnetic field in a hypereutectoid steel during austenitic decomposition Fulltext Access 4 Pages 2006
The role of the chemical reaction in the infiltration of porous carbon by NiSi alloys Fulltext Access 4 Pages 2006
Effects of activated hydrogen etching on surface roughness and optical properties of diamond films Fulltext Access 4 Pages 2006
Formation and mechanical properties of (Ce–La–Pr–Nd)–Co–Al bulk glassy alloys with superior glass-forming ability Fulltext Access 4 Pages 2006
The effect of high magnetic field on the growth behavior of Sn–3Ag–0.5Cu/Cu IMC layer Fulltext Access 4 Pages 2006
The role of shear stress in the formation of annealing twin boundaries in copper Fulltext Access 4 Pages 2006
Influence of stacking-fault energy on high temperature creep of alpha titanium alloys Fulltext Access 4 Pages 2006
An improved relation for the effective elastic compliance of a film/substrate system during indentation by a flat cylindrical punch Fulltext Access 4 Pages 2006
Annealing behaviour of cold rolled aluminum alloy in a high magnetic field Fulltext Access 4 Pages 2006
Influence of oxidation on the high-temperature mechanical properties of zirconia/nickel cermets Fulltext Access 4 Pages 2006
Strength and residual stresses of functionally graded Al2O3/ZrO2 discs prepared by electrophoretic deposition Fulltext Access 4 Pages 2006
Effects of strain and annealing processes on the distribution of Σ3 boundaries in a Ni-based superalloy Fulltext Access 4 Pages 2006
Oxygen, hydrogen, and deuterium effects on plasma nitriding of metal alloys Fulltext Access 4 Pages 2006
The effect of Mg addition on the stability of Al–Al2O3 foams made by a powder metallurgy route Fulltext Access 4 Pages 2006
Strain hardening and recovery in a bulk metallic glass under nanoindentation Fulltext Access 4 Pages 2006
Tailoring of temperature coefficient of capacitance (TCC) in nanocomposite capacitors Fulltext Access 4 Pages 2006
Formation of glassy and icosahedral phases in as-cast (Zr9Ni4)75(Al1−xTix)25 alloys Fulltext Access 4 Pages 2006
Effect of B4C particle size on microstructure of in situ titanium matrix composites prepared by reactive processing of Ti–B4C system Fulltext Access 4 Pages 2006
Grain size effect in corrosion behavior of electrodeposited nanocrystalline Ni coatings in alkaline solution Fulltext Access 4 Pages 2006
Nanoscale incipient asperity sliding and interface micro-slip assessed by the measurement of tangential contact stiffness Fulltext Access 4 Pages 2006
Increased strain rate sensitivity due to stress-coupled grain growth in nanocrystalline Al Fulltext Access 4 Pages 2006
Composition dependent ductility in the amorphous Zr–Ti–Ni–Cu–Be alloy system Fulltext Access 4 Pages 2006
Influence of neighbourhood on abnormal Goss grain growth in Fe–3% Si steels: Formation of island grains in the large growing grain Fulltext Access 4 Pages 2006
Texture and weak grain size dependence in friction stir processed Mg–Al–Zn alloy Fulltext Access 4 Pages 2006
Corrosion behavior of pure iron beneath a micro-droplet of sulfuric acid solution investigated by atomic force microscopy Fulltext Access 4 Pages 2006
The interaction of natural ageing with straining in a twin-roll cast AlMgSi automotive sheet Fulltext Access 4 Pages 2006
Microwave sintering of poly-ether-ether-ketone (PEEK) based coatings deposited on metallic substrate Fulltext Access 4 Pages 2006
Application of edge-to-edge matching model to understand the in-plane texture of TiSi2 (C49) thin films on (0 0 1)Si surface Fulltext Access 4 Pages 2006
In situ X-ray diffraction analysis on the crystallization of amorphous Ti-Ni thin films Fulltext Access 4 Pages 2006
A novel Ni-free Zr-based bulk metallic glass with enhanced plasticity and good biocompatibility Fulltext Access 4 Pages 2006
Lattice deformation and shape memory characteristics of Ti–30Ni–20Cu(at.%) alloy ribbons Fulltext Access 4 Pages 2006
Effect of solid-solution strengthening on fracture toughness in extruded Mg–Zn alloys Fulltext Access 4 Pages 2006
Observations of reactive element gettering of sulfur in thermally grown oxide pegs Fulltext Access 4 Pages 2006
Microstructure and hardness of spray-formed chromium-containing steel tooling Fulltext Access 4 Pages 2006
Understanding the crystallography of the eutectoid microstructure in a Zn–Al alloy using the edge-to-edge matching model Fulltext Access 4 Pages 2006
A novel water leaching and sintering process for manufacturing highly porous stainless steel Fulltext Access 4 Pages 2006
Inherent internal friction of B2 → R and R → B19′ martensitic transformations in equiatomic TiNi shape memory alloy Fulltext Access 4 Pages 2006
Effect of high hydrostatic pressure on premartensitic transition in Ni2MnGa Fulltext Access 4 Pages 2006
Effect of diamond crystallographic orientation on dissolution and carbide formation in contact with liquid aluminium Fulltext Access 4 Pages 2006
X-ray diffraction investigation of self-annealing in nanocrystalline copper electrodeposits Fulltext Access 4 Pages 2006
Ordered amino-functionalized mesoporous silica thin films for high-density DNA probes Fulltext Access 4 Pages 2006
Effect of multiple-pass friction stir processing on microstructure and tensile properties of a cast aluminum–silicon alloy Fulltext Access 4 Pages 2006
Magnetization changes in Ni–Mn–Ga magnetic shape memory single crystal during compressive stress reorientation Fulltext Access 4 Pages 2006
Reply to comments on ‘Incomplete transformation induced multiple-step transformation in TiNi shape memory alloys’ Fulltext Access 4 Pages 2006
X-ray micro-tomographic observations of hot tear damage in an Al–Mg commercial alloy Fulltext Access 4 Pages 2006
Non-linear ultrasonic technique to assess fatigue damage in structural steel Fulltext Access 4 Pages 2006
Preparation, characterization and photocatalytic properties of Bi12SiO20 powders Fulltext Access 4 Pages 2006
General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters Fulltext Access 4 Pages 2006
Evidence of phase separation correlated with nanocrystallization in Al85Ni5Y6Fe2Co2 metallic glass Fulltext Access 4 Pages 2006
In situ scanning electron microscopy observations of tensile deformation in a boron-modified Ti–6Al–4V alloy Fulltext Access 4 Pages 2006
Effective growth law from three-dimensional grain growth simulations and new analytical grain size distribution Fulltext Access 4 Pages 2006
On the role of carbides during the recrystallization of a directionally solidified nickel-base superalloy Fulltext Access 4 Pages 2006
Effects of substituting rare-earth elements for scandium in a precipitation-strengthened Al–0.08 at. %Sc alloy Fulltext Access 4 Pages 2006