کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10152007 | 1666144 | 2018 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Determining tool/chip temperatures from thermography measurements in metal cutting
ترجمه فارسی عنوان
تعیین دمای ابزار / تراشه از اندازه گیری های ترموگرافی در برش فلز
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
اندازه گیری دما، ترموگرافی مادون قرمز، برش فلز، برش متعارف،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
As a case study, the research was conducted on a set of four ferrite-pearlite steels (16MnCr5, 27MnCr, C45 and C60). The results demonstrated the effectiveness of the method to establish the real influence of the cutting conditions (cutting speed and feed) and to distinguish the effect that different work material microstructures have in tool/chip temperature. Furthermore, the results showed a high degree of accuracy and less than 12% deviation from the trends when compared with 2D cutting simulations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 145, 25 December 2018, Pages 305-314
Journal: Applied Thermal Engineering - Volume 145, 25 December 2018, Pages 305-314
نویسندگان
M. Saez-de-Buruaga, D. Soler, P.X. Aristimuño, J.A. Esnaola, P.J. Arrazola,