کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10248900 | 49421 | 2005 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Comparison of normal and inverse poly(3-hexylthiophene)/fullerene solar cell architectures
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
کاتالیزور
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Comparison of normal and inverse poly(3-hexylthiophene)/fullerene solar cell architectures Comparison of normal and inverse poly(3-hexylthiophene)/fullerene solar cell architectures](/preview/png/10248900.png)
چکیده انگلیسی
Polymer solar cells based on regioregular poly(3-hexylthiophene) (P3HT) and ([6,6]-phenyl-C61-butyric acid methyl ester) (PCBM) were fabricated with two different architectures (normal and inverse). Normal cells using indium tin oxide (ITO) as anode and Al as cathode were fabricated on polyester foils and illuminated from substrate side. Inverse cells using Ti as cathode and ultrathin Au layer as anode were illuminated from the top side covered by a transparent Au contact. Both Au layer and PET/ITO show comparable transmission in the spectral range where P3HT absorbs. Inverse cells showed comparable device parameters to normal cell (open circuit voltage 550Â mV, short circuit current 6.25Â mA/cm2, fill factor 0.33 and white light power conversion efficiency 1.12%).
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Solar Energy Materials and Solar Cells - Volume 85, Issue 2, 15 January 2005, Pages 277-283
Journal: Solar Energy Materials and Solar Cells - Volume 85, Issue 2, 15 January 2005, Pages 277-283
نویسندگان
Maher Al-Ibrahim, Steffi Sensfuss, Jutta Uziel, Gernot Ecke, Oliver Ambacher,