کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10274719 461666 2016 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Kinetic modeling of a combined tar removal and methanation reactor for biogenous synthesis gas at medium temperature conditions
ترجمه فارسی عنوان
مدل سازی سینتیکی یک مخلوط و راکتور متان سازی برای گاز سنتز بیوژن در شرایط دمای متوسط
کلمات کلیدی
تبدیل تار، متانیت، مدل سازی، سینتیک حذف تار، غیر فعال کردن کاتالیست
ترجمه چکیده
یکپارچه اصلاح و بخار بخار ترکیبی در دمای پایین نسبتا کم، یک گزینه تمیز کردن جالب گاز برای گیاهان گازسیلیزینگ غیر متمرکز و کوچک است. در جریان کار، یک مدل ترمودینامیکی برای راکتور تخلیه ترم توسعه داده شده است، با استفاده از توازن توده و انرژی، سینتیک واکنش و معادلات تعادل. برای توصیف واکنش های شیمیایی به دقت، داده های جنبشی، برای واکنش های گاز و بخار اصلاح قیر، به عنوان دو توده (هیدروسیکلی و چند حلقه ای آروماتیک) در نظر گرفته شده است، به مدل اعمال می شود. ضرایب جنبشی با استفاده از داده های آزمایشی با توجه به ارزش ادبیات رگرسیون می شوند. از آنجا که غیرفعال کردن کاتالیزور یک مانع عمده است به خصوص در شرایط کم دما، غیرفعال کردن کاتالیزور با استفاده از مصرف کاتالیزور خاص، یک پارامتر تعیین شده تجربی، اجتناب از نیازهای داده ای یک مدل سینتیکی، به مدل اعمال می شود. عملکرد مدل راکتور ارزیابی شده و با داده های آزمایشگاهی مقایسه شده است، که نشان دهنده توافق خوب با مقادیر اندازه گیری شده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
Combined tar steam reforming and methanation at relative low temperatures are an interesting gas cleaning option for decentralized, small-scale allothermal gasification plants. In the course of the work, a thermodynamic model for the tar removal reactor is developed, applying mass and energy balances, reaction kinetics and equilibrium equations. To describe the chemical reactions accurately, kinetic data, for the gas reactions and the steam reforming of tar, considered as two lumps (heterocyclic and polycyclic aromatics), is implemented into the model. The kinetic coefficients are obtained by regressing experimental data considering literature values. Since catalyst deactivation is a major obstacle especially at low temperature conditions, catalyst deactivation is implemented into the model by using the specific-catalyst-consumption, an empirically determined parameter, avoiding the data requirements of a kinetic model. The performance of the reactor model is evaluated and compared to experimental data, showing good agreement with the measured values.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel Processing Technology - Volume 141, Part 1, January 2016, Pages 159-166
نویسندگان
, , ,