An alternative interface for CE-ICP-MS cadmium speciation in metallothioneins based on volatile species generation

An alternative CE-ICP-MS interface based on volatile species generation (VSG) is here developed, evaluated and compared to the conventional sample introduction systems via nebulisation. For this purpose, the speciation of Cd-metallothioneins (MTs) in rabbit liver is taken as a model. Cd, bound to the different MT isoforms previously separated by CE, is transformed into volatile species at the exit of the capillary and on-line detected by ICP-MS. Optimum conditions for Cd VSG have been investigated in a flow injection device, using NaBH4 as hydrogenation reagent in a HCl medium containing cobalt and thiourea as catalysts. Sample volume injected, CE separation voltage and reagents flows have been optimised. Analytical performance characteristics of the CE-VSG-ICP-(Q)MS coupling developed were evaluated, in terms of repeatability and linearity of response, using standard rabbit liver metallothionein isoforms (MT1 and MT2). Detection limits for Cd-MTs turned out to be almost one order of magnitude better than those derived from using a conventional Babington nebuliser-based interface. Compared to a MicroMist-based interface detection limits resulted to be similar, but the observed peak height was eight times higher using the VSG interface, indicating the enhanced analyte transport efficiency derived from VSG sample introduction systems.