A new approach for the extraction of pollutants from wastewaters handled by the graphic industry

It is widely recognized that the Graphic Industry handles toxic products and produces, in its various operations, toxic wastes. These wastes can cause serious environmental damages and can lead to severe health problems.In this work we report an efficient, simple and cheap to run method for the removal of some of the most common pollutants involved in the various stages of the Graphic Industry production, using a Solid-Phase Extraction (SPE) methodology. We have determined equilibrium constants, Keq, and adsorption (kup) and desorption (koff) rate constants for the extraction of benzene, xylene, toluene and ethylbenzene (BXTE) from water, using C18 disks. The removal of these compounds was monitored by UV–vis spectroscopy, at room temperature. Average extraction efficiencies were of 60% in a mixture of BXTEs and close to 80% when pollutants were assessed separately.Since the retention mechanism in the C18 disk is essentially governed by hydrophobic interactions between the compounds and the alkyl chains of the disk, we have also shown that these pollutants' lipophilicity plays an important role in the rationalization of their behavior during the extraction process.

Figure optionsDownload as PowerPoint slideHighlights
► A simple, efficient and cheap method for removal of toxic wastes is proposed.
► C18 disks were used as adsorbents to extract BXTE from aqueous solutions.
► Average extraction efficiencies of 70% were obtained.
► Pollutants' lipophilicity was identified as a key factor in the extraction process.