Evaluation of targeting methods for implementation of best management practices in the Saginaw River Watershed

Increasing concerns regarding water quality in the Great Lakes region are mainly due to changes in urban and agricultural landscapes. Both point and non-point sources contribute pollution to Great Lakes surface waters. Best management practices (BMPs) are a common tool used to reduce both point and non-point source pollution and improve water quality. Meanwhile, identification of critical source areas of pollution and placement of BMPs plays an important role in pollution reduction. The goal of this study is to evaluate the performance of different targeting methods in 1) identifying priority areas (high, medium, and low) based on various factors such as pollutant concentration, load, and yield, 2) comparing pollutant (sediment, total nitrogen-TN, and total phosphorus-TP) reduction in priority areas defined by all targeting methods, 3) determine the BMP relative sensitivity index among all targeting methods. Ten BMPs were implemented in the Saginaw River Watershed using the Soil and Water Assessment Tool (SWAT) model following identification of priority areas. Each targeting method selected distinct high priority areas based on the methodology of implementation. The concentration based targeting method was most effective at reduction of TN and TP, likely because it selected the greatest area of high priority for BMP implementation. The subbasin load targeting method was most effective at reducing sediment because it tended to select large, highly agricultural subbasins for BMP implementation. When implementing BMPs, native grass and terraces were generally the most effective, while conservation tillage and residue management had limited effectiveness. The BMP relative sensitivity index revealed that most combinations of targeting methods and priority areas resulted in a proportional decrease in pollutant load from the subbasin level and watershed outlet. However, the concentration and yield methods were more effective at subbasin reduction, while the stream load method was more effective at reducing pollutants at the watershed outlet. The results of this study indicate that emphasis should be placed on selection of the proper targeting method and BMP to meet the needs and goals of a BMP implementation project because different targeting methods produce varying results.

► In this study performance of four targeting methods and 10 control practices were evaluated.
► The concentration based targeting methods were most effective at nutrient reduction.
► The subbasin load targeting method was most effective at reducing sediment.
► The concentration and yield methods are more effective at pollution reduction at subbasins.
► The stream load method is more effective at reducing pollutants at the watershed outlet.