Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites

Effects of different dispersion states of carbon nanotubes (CNTs) on rheological, mechanical, electrical, and thermal properties of the epoxy nanocomposites were studied. The dispersion states were altered depending upon whether a solvent was employed or not. To characterize dispersion of the CNTs, field emission scanning electron microscope (FESEM) and transmission electron microscopy (TEM) were used. It was found that the nanocomposites containing poorly dispersed CNTs exhibited higher storage modulus, loss modulus, and complex viscosity than ones with well dispersed CNTs. It means that the poorly dispersed CNTs/epoxy composites have, from a rheological point of view, a more solid-like behavior. Tensile strength and elongation at break of the nanocomposites with different dispersion of CNTs were measured. Both of the well and the poorly dispersed CNTs composites showed a percolation threshold of electrical conductivity at less than 0.5 wt.% CNTs loading and the former had higher electrical and thermal conductivities than the latter. Effects of the CNTs content on the physical properties were also examined experimentally. As loading of the CNTs increased, improved results were obtained. From the morphological observation by FESEM and TEM, it was found that when the solvent was not used in the CNTs dispersion process, aggregates of pristine CNTs remained in the nanocomposites.