Tailoring the pore structure and property of porous biphasic calcium phosphate ceramics by NaCl additive

This study investigated the effects of NaCl additive on the phase composition, pore structure and mechanical property of porous biphasic calcium phosphate (BCP) ceramics, which were prepared by freeze-casting. The results indicated that the addition of NaCl promoted transformation of β-tricalcium phosphate to hydroxyapatite in the BCP ceramics; the OH group in HA phase of BCP ceramic was partially replaced by chloride ion. As the mass fraction of NaCl in the slurry increased from 0 to 3%, the porosity of obtained porous BCP ceramics decreased from 77.76% to 60.22%; the average width of dendritic pores increased from 74.37 µm to 111.27 µm; the compressive strength achieved threefold increase. As the amount of NaCl additive reached 4.5%, the porosity, pore width, and compressive strength of the porous BCP ceramics were comparable with those modified by 3% NaCl. NaCl is regarded as an effective additive to tailor the pore structure and property of freeze-cast porous ceramics.