کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
11003865 | 1462932 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Hydrodynamic effects on flow accelerated corrosion at 120â¯Â°C and neutral pH conditions
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Hydrodynamic effects on flow accelerated corrosion at 120â¯Â°C and neutral pH conditions Hydrodynamic effects on flow accelerated corrosion at 120â¯Â°C and neutral pH conditions](/preview/png/11003865.png)
چکیده انگلیسی
The objective of present study is to investigate the influence of bend geometry and the resulting flow phenomenon on the rate of metal loss due to Flow Accelerated Corrosion (FAC). Experiments were carried out with an aggressive chemistry of neutral pH (6.5-7.0) and at a temperature of 120â¯Â°C to minimize the time duration required to make unambiguous measurement of the change of wall thickness due to FAC. Measurement of FAC rate was carried out by installing a stainless steel FAC specimen holder, in which the bend pipe was assembled by stacking carbon steel rings to simulate a bend of 10â¯mm bore with 58o bend angle and twice the bend diameter. The flow rate was adjusted to maintain a velocity of 7â¯m/s in the test section. The corrosion rate was experimentally quantified by the weight loss method, over an exposure period of two months at 120â¯Â°C in single phase of de-mineralized water. During this experiment, the value for the average thickness loss was found to be 0.9â¯mm. The turbulence patterns in the bend specimen holder were mapped by Computational Fluid Dynamics (CFD) parameters such as the wall shear stress and turbulent kinetic energy. The simulated mass transfer co-efficient and the corresponding corrosion rate correlated well with those of the measured values in various regions of the bend. The CFD studies showed that the intrados of the bend corrodes at a faster rate as compared to other regions of the bend. The change in temperature at a constant volumetric flow rate and in liquid phase does not significantly affect the velocity profile in the bend geometry.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Failure Analysis - Volume 94, December 2018, Pages 458-468
Journal: Engineering Failure Analysis - Volume 94, December 2018, Pages 458-468
نویسندگان
P. Madasamy, T.V. Krishna Mohan, Andrews Sylvanus, E. Natarajan, H.P. Rani, S. Velmurugan,