Tensile deformation of polyamide (PA) 6 probed by rheo-optical near-infrared (NIR) spectroscopy

A rheo-optical near-infrared (NIR) spectroscopy, based on the combination of NIR spectroscopy and mechanical analysis, was applied to polyamide (PA) 6 samples consisting of bundled amorphous chains. Sets of strain-dependent NIR spectra as well as tensile stress of dried and wet treated PA 6 samples were collected during the mechanical elongation of the samples. The spectra were then subjected to two-dimensional (2D) correlation analysis to elucidate fine features of the spectral changes. An asynchronous correlation peak develops between the bands at 2355 and 2300 nm due to the combination modes of CH2 groups arising from the rubbery amorphous chain and rigid crystalline lamella of the dried PA 6, respectively. It therefore indicates that during the tensile deformation, the orientation of the amorphous chain is induced first to cause the elastic deformation. Further elongation results in the rotation of the crystalline lamella connected with the amorphous chain. This correlation intensity apparently increases by the wet treatment, suggesting that water molecule in the PA 6 disrupts the H-bonding interaction between the adjacent polymer chains and thus makes the polymer more flexible. Accordingly, it is likely the H-bonding between the polymer chains works in a manner somewhat similar to cross-linked polymers, which substantially effects on the mechanical property of the PA 6.