Pressure-assisted electrokinetic injection for on-line enrichment in capillary electrophoresis–mass spectrometry: A sensitive method for measurement of ten haloacetic acids in drinking water

Haloacetic acids (HAAs) are by-products of the chlorination of drinking water containing natural organic matter and bromide. A simple and sensitive method has been developed for determination of ten HAAs in drinking water. The pressure-assisted electrokinetic injection (PAEKI), an on-line enrichment technique, was employed to introduce the sample into a capillary electrophoresis (CE)–electrospray ionization–tandem mass spectrometry system (ESI-MS/MS). HAAs were monitored in selected reaction monitoring mode. With 3 min of PAEKI time, the ten major HAAs (HAA10) in drinking water were enriched up to 20,000-fold into the capillary without compromising resolution. A simple solid phase clean-up method has been developed to eliminate the influence of ionic matrices from drinking water on PAEKI. Under conditions optimized for mass spectrometry, PAEKI and capillary electrophoresis, detection limits defined as three times ratio of signal to noise have been achieved in a range of 0.013–0.12 μg L−1 for ten HAAs in water sample. The overall recoveries for all ten HAAs in drinking water samples were between 76 and 125%. Six HAAs including monochloro- (MCAA), dichloro- (DCAA), trichloro- (TCAA), monobromo- (MBAA), bromochloro- (BCAA), and bromodichloroacetic acids (BDCAA) were found in tap water samples collected.

Figure optionsDownload as PowerPoint slideHighlights
► A simple and sensitive method was developed for determination of ten HAAs in drinking water.
► Pressure-assisted electrokinetic injection was used for sample introduction in CE–MS/MS.
► HAAs were enriched up to 20,000-fold into capillary without compromising separation.
► A simple clean-up method has been developed to eliminate the matrix effect on PAEKI.