Method study for the preparation of a wet sediment quality control material

Quality control materials (QCMs) to be used in daily quality control in environmental laboratories are required to be similar to real samples in terms both of composition and of physical state. The present paper describes in detail the procedure of preparation and the results of homogeneity and stability studies performed on wet sediments QCMs. For this purpose, two sediments with different matrix composition were selected and the main factors involved in the preparation of the material were carefully studied and established with the aim of guaranteeing long-term stability of the QCM: pre-treatment steps, homogenisation, bottling and storage. The results obtained from the homogeneity and from 12 months of stability studies for Cd, Cr, Cu, Ni, Pb and Zn following the aqua regia extraction procedure (ISO 11466), showed that the wet sediment QCMs we have developed are feasible, constituting a new and useful material among the aquatic sediments for quality control purposes in monitoring.