Influence of drying and extraction methods on yield and chemical composition of the essential oil of Satureja hortensis

The aerial parts of Satureja hortensis, cultivated in Iran (Research Station of Alborz, Karaj), were collected at the full-flowering stage and dried by three different drying methods (sun-drying, shade-drying and oven-drying at 45 °C). The essential oils of every treatment were obtained by hydro-distillation of the aerial parts. In addition, the essential oil of shade-dried sample was obtained by two other distillation methods (water- and steam-distillation and direct steam-distillation). The oils were analyzed by capillary GC and GC–MS. Statistical analysis showed no significant difference between oil yield (w/w) of the oven-dried sample (1.06%) compared to shade-dried (0.94%) and sun-dried (0.87%). The oil content of the shade-dried sample, obtained by hydro-distillation, was higher (0.94%) than that of the steam-distilled (0.27%). Twenty-three components were identified in the oil of S. hortensis in the different drying methods, including carvacrol (46.0–48.1%) and γ-terpinene (37.7–39.4%) as main components. Seventeen compounds were characterized in the oils of different distillation methods, including carvacrol (12.3–46%) and γ-terpinene (37.7–70.4%). Although the drying methods had no significant effect on oil composition of S. hortensis, the distillation changed the percentage of main components sharply (significant at 1%). The steam-distillation method produced the lowest amount of carvacrol and highest amount of γ-terpinene. The results showed that extraction by hydro-distillation gave the best results for S. hortensis, based on oil yield and carvacrol percentage.