کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1197749 1492987 2007 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition
موضوعات مرتبط
مهندسی و علوم پایه شیمی شیمی آنالیزی یا شیمی تجزیه
پیش نمایش صفحه اول مقاله
Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition
چکیده انگلیسی

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO2 cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO2 and Li2O–B2O3–P2O5 electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO2 was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li2O–P2O5–B2O3 glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Analytical and Applied Pyrolysis - Volume 80, Issue 2, October 2007, Pages 502–506
نویسندگان
, , , ,