Influence of the crosslinker type on the chromatographic properties of hydrophilic sulfoalkylbetaine-type monolithic columns

• Crosslinker type significantly affects hydrophilicity of sulfobetaine monolithic column.
• Column efficiencies as high as 100,000 plates/m were obtained at high linear flow rate.
• Crosslinker type affects selectivity of sulfobetaine monolithic column.
• The novel hydrophilic monolithic columns are suitable for the separation of polar compounds.

In order to investigate the effects of the crosslinker on the separation performance of polar zwitterionic sulfoalkylbetaine-type monolithic columns, three crosslinkers, i.e. 1,4-bis(acryloyl)piperazine (PDA), ethylene dimethacrylate (EDMA) and N,N′-methylenebisacrylamide (MBA), were copolymerized with the hydrophilic monomer N,N-dimethyl-N-acryloyloxyethyl-N-(3-sulfopropyl)ammonium betaine (SPDA). The chromatographic properties of the three hydrophilic sulfoalkylbetaine-type monolithic columns, including column efficiency, permeability, porosity and separation mechanism, were systematically compared using scanning electron microscopy or micro-HPLC. Good selectivity in micro-HPLC separations was achieved on all three monolithic columns. The results indicate that the polarity of sulfoalkylbetaine-type monolithic columns may be related to the polarity of the crosslinker, which further affects column selectivity and efficiency. A particularly high column efficiency (100,000 plates/m) was obtained on the novel poly(SPDA-co-PDA) monolithic column at a linear velocity of 1 mm/s using thiourea as test analyte. A higher resolution was also observed for nucleobases, nucleosides and hydrophilic organic acids on this novel poly(SPDA-co-PDA) monolithic column compared to the other two columns.