Development of an integrated direct-contacting optical-fiber microchip with light-emitting diode-induced fluorescence detection

In this paper, one poly(dimethylsiloxane) (PDMS) sandwich microchip integrated with one direct-contacting optical fiber was fabricated by using a thin-casting method. This novel integrated PDMS sandwich microchip included top glass plate, PDMS membrane replica with microfluidic networks and optical fiber, flat PDMS membrane and bottom glass plate. As the tip of excitation optical fiber completely contacted with the separation microchannel in this integrated microchip, it not only increased the excitation light intensity to achieve the high sensitivity, but also reduced the diameter of excitation beam to obtain high resolution. In addition, we found that this rigid PDMS sandwich microchip structure effectively prevented PDMS microchannel distortion from rigid optical fiber, and provided a substantial convenience for microchips manipulating. A blue light-emitting diode (LED) was applied as excitation source by using optical fiber to couple excitation light into its direct-contacting microchannel for fluorescence detection. The performances of this integrated PDMS sandwich microchip was demonstrated by separating the mixture of sodium fluorescein (SF) and fluorescein isothiocyanate isomer I (FITC), and showed a higher sensitive and resolution than those obtained from the conventional integrated optical-fiber PDMS microchip with a 100-μm distance between fiber tip and separation microchannel. Additionally, the reproducibility of this integrated microchip with LED-induced fluorescence detection was also examined by separation of a mixture of FITC-labeled amino acids.