Synthesis of UV-absorbing and fluorescent carrier ampholyte mixtures and their application for the determination of the operational pH values of buffering membranes used in isoelectric trapping separations

Success in isoelectric trapping separations critically depends on the knowledge of the accurate operational pH value of the buffering membranes used. Currently, due to a lack of easy, rapid, accurate methods that can be used for the post-synthesis determination of the operational pH value of a buffering membrane, only nominal pH values calculated from the amounts of the reagents used in the synthesis of the membranes and their acid-base dissociation constants are available. To rectify this problem, UV-absorbing and fluorescent carrier ampholyte mixtures were prepared by alkylating pentaethylenehexamine with a chromophore and a fluorophore, followed by Michael addition of acrylic acid and itaconic acid to the resulting oligoamine. Carrier ampholyte mixtures, with evenly distributed absorbance values across the 3 < pI < 10 range, were prepared by blending. The master blend served as the feed mixture in binary isoelectric trapping separations that used the buffering membrane to be characterized. The pI value of the most basic UV-absorbing or fluorescent carrier ampholyte collected in the anodic separation compartment, determined by full-column imaging capillary isoelectric focusing analysis, indicates the operational pH value of the separation membrane.