Characterization of stationary phases in subcritical fluid chromatography by the solvation parameter model: I. Alkylsiloxane-bonded stationary phases

Varied types of alkylsiloxane-bonded and fluoroalkylsiloxane-bonded stationary phases, all commercially available, were investigated with subcritical fluid mobile phase. The effect of the alkyl chain length (from C4 to C18) and of the nature of the bonding (fluorodecylsiloxane, phenyl-C18 and polar-embedded-C18) on the chromatographic behaviour was investigated by the use of a linear solvation energy relationship (LSER), the solvation parameter model. A large set of test compounds provides precise and reliable information on the intermolecular interactions responsible for retention on these stationary phases used with a subcritical mobile phase. First of all, the results underline the close properties between subcritical fluid and organic liquid. The use of non aqueous mobile phases reduces the cavity energy and the mobile phase acidity generally encountered with aqueous liquid phases, allowing other interactions to take a part in retention. As expected, an increase in the alkyl chain length favours the dispersive interactions between the solutes and the stationary phases. Changes in basicity and acidity of the stationary phases are also related to the chain length, but, in this case, mobile phase adsorption onto the stationary phase is supposed to explain these behaviours. The addition of a phenyl group at the bottom of the C18 chain, near the silica, does not induce great modifications in the retentive properties. The fluorodecylsiloxane and the polar-embedded alkylsiloxane phases display very different properties, and can be complementary to the classical alkylsiloxane-bonded phases. In particular, the fluorinated phase does not favour the dispersive interactions, in comparison to hydrogenated stationary phases, when the basicity of the polar-embedded phase is obviously greater than the one of classical alkylsiloxane-bonded phases, due to the amide function. Finally, log k–log k curves plotted between the different phases illustrate the effect of the interaction properties on the retention of different classes of compounds.