Energy resolved X-ray fluorescence imaging based on a micropattern gas detector

A simple system for energy resolved X-ray fluorescence imaging using a room temperature, 2-D sensitive Micro-Hole and Strip Plate (MHSP) operating in pure xenon is proposed. The Micro-Hole and Strip Plate is an electron multiplier with two stages of avalanche production, one of them in the holes and another one in the anode strips. The X-ray interaction via photoelectron absorption in the xenon produces a number of electrons proportional to the incoming X-ray energy. The electron cloud is, then, amplified in the two amplification stages, resulting in a charge pulse that is also proportional to the detected X-ray energy. The 2-D capability is achieved in the Micro-Hole and Strip Plate by using two orthogonal resistive lines, one connecting the anode strips on the bottom face of the Micro-Hole and Strip Plate and the other one connecting the strips structured on the Micro-Hole and Strip Plate top surface. This low cost detector has an active area of 28 × 28 mm2, an intrinsic position resolution of σ∼ 125 µm, an energy resolution of about 825 eV (Full Width at Half Maximum) at 5.9 keV and a count rate capability as high as 0.5 MHz. Fluorescence images were obtained by irradiating the sample with X-rays and using a pinhole placed between the sample and the detector window. Elemental map discrimination for different samples, image amplification and detector parameters, are presented.