کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1270869 | 1497547 | 2012 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Atomic layer deposited thin film metal oxides for fuel production in a solar cavity reactor Atomic layer deposited thin film metal oxides for fuel production in a solar cavity reactor](/preview/png/1270869.png)
Alumina thin film structures were produced by coating high surface area polymer particles via atomic layer deposition (ALD), using the polymer as a sacrificial template. Burnout of the polymer material left high surface area, high pore volume structures, with 15 nm wall thickness. Further deposition of up to 27 mol% Co and Fe was performed via ALD to produce high surface area CoFe2O4 particles for thermochemical water splitting. The ALD particles were thermally cycled in electrically heated lab reactors and on-sun using a concentrated solar, reflective cavity reactor. Surface area measurements of cycled ALD particles showed improved surface area retention as compared to bulk Fe2O3 nanopowders. Reaction rates as high as 15.2 and 9.8 μmol/s/g were observed, on-sun, for H2O and CO2 splitting respectively. Thermochemical cycling in a concentrated solar cavity reactor showed an order of magnitude increase in solar utilization efficiency between ALD particles and bulk Fe2O3 nanopowders.
► Template directed production of mixed metal ferrites for hydrogen production.
► Characterization and comparison to Iron-oxide thermochemical cycle.
► Improved surface area retention leading to improved H2 and CO production.
► Full cycle validation in a prototype concentration cavity reactor.
Journal: International Journal of Hydrogen Energy - Volume 37, Issue 22, November 2012, Pages 16888–16894