Detailed numerical simulation of syngas combustion under partially premixed combustion engine conditions

Two-dimensional detailed numerical simulation is performed to study syngas/air combustion under partially premixed combustion (PPC) engine conditions. Detailed chemical kinetics and transport properties are employed in the study. The fuel, a mixture of CO and H2 with a 1:1 molar ratio, is introduced to the domain at two different instances of time, corresponding to the multiple injection strategy of fuel used in PPC engines. It is found that the ratio of the fuel mass between the second injection and the first injection affects the combustion and emission process greatly; there is a tradeoff between NO emission and CO emission when varying the fuel mass ratio. The ignition zone structures under various fuel mass ratios are examined. A premixed burn region and a diffusion burn region are identified. The premixed burn region ignites first, followed by the ignition of mixtures at the diffusion burn region, and finally a thin diffusion flame is formed to burn out the remaining fuel. NO is produced mainly in the premixed burn region, and later from the diffusion burn region in mixtures close to stoichiometry, whereas unburned CO emission is mainly from the diffusion burn region. An optimization of the fuel mass in the two regions can offer a better tradeoff between NO emission and CO emission. The effects of initial temperature and turbulence on the premixed burn and diffusion burn regions are investigated.

► DNS of syngas combustion under PPC engine conditions.
► Detailed ignition and reaction zone structures revealing insights into PPC process.
► Mechanisms of NO/CO tradeoff in syngas combustion under PPC conditions.