Nanostructured Ti-doped hematite (α-Fe2O3) photoanodes for efficient photoelectrochemical water oxidation

• Hematite(α-Fe2O3) nanostructure (NS) was synthesized by pulsed laser deposition.
• The NS film is column-like architecture with open channels of pores.
• The NS electrode showed superior photovoltaic performance, compared to thin film.

We present a form of hematite (α-Fe2O3) nanostructured architecture suitable for photoelectrochemical water oxidation that is easily synthesized by a pulsed laser deposition (PLD) method. The architecture is a column-like porous nanostructure consisting of nanoparticles 30–50 nm in size with open channels of pores between the columns. This nanostructured film is generated by controlling the kinetic energy of the ablated species during the pulsed laser deposition process. In a comparison with the nanostructured film, hematite thin film was also synthesized by PLD. All of the developed films were successfully doped with 1.0 at% of titanium. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) and UV–visible spectroscopy were used to characterize the films. To fabricate the photoelectrochemical (PEC) cell, Ti-doped hematite films were used as the working electrode, Ag/AgCl as the reference electrode, platinum wire as the counter electrode and an aqueous solution of 1 M NaOH as the electrolyte. The photovoltaic characteristics of all cells were investigated under AM 1.5G sunlight illumination of 100 mW/cm2. The photocurrent density was enhanced by approximately 220% using nanostructured film at 0.7 V versus Ag/AgCl compared to hematite thin film, and the highest photocurrent density of 2.1 mA/cm2 at 0.7 V/Ag/AgCl was obtained from the 1.0 at% Ti-doped hematite nanostructured film. The enhanced photocurrent density is attributed to its effective charge collection due to its unique column-like architecture with a large surface area.