کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1274303 | 1497638 | 2009 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Heat flux analysis of a cylindrical steam reformer by a modified Nusselt number Heat flux analysis of a cylindrical steam reformer by a modified Nusselt number](/preview/png/1274303.png)
A numerical method is used to investigate a steam reformer. The reactor is assumed as a porous medium, because it is filled with catalysts of a packed-bed type, and a pseudo-homogeneous model is incorporated for a chemical reaction model. The steam reforming (SR) reaction, water–gas shift (WGS) reaction, and direct steam reforming (DSR) reaction are assumed to be dominant reactions in the steam reformer. The difference in temperature between the inside and outside of the reactor is a driving force in heat transfer, and is affected by the amount of heat adsorption by an endothermic reaction. A modified Nusselt number (NuM) can represent the heat transfer rate of the endothermic reactor, and thus NuM can be used to describe the performance of the steam reformer. The SR reaction rate is sufficiently activated when NuM around the inlet region is greater than 10, and fuel conversion exceeds 0.9 when the difference in NuM value between the inlet area and outlet area is greater than 5. The correlation between fuel conversion and operating conditions has also been studied by using NuM.
Journal: International Journal of Hydrogen Energy - Volume 34, Issue 4, February 2009, Pages 1828–1834