کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1276751 | 1497597 | 2010 | 10 صفحه PDF | دانلود رایگان |
In this work, two nitride coatings deposited on aluminum-based bipolar plates via cathodic arc evaporation physical vapor deposition (CAE-PVD) have been evaluated using two different techniques. The coating materials, a multi-layer chromium-zirconium nitride (ZrN–CrN) and a monolayer chromium nitride (CrN) have been exposed to electrochemical polarization tests for corrosion resistance simulating the typical environment in the anode and cathode sides in polymer electrolyte membrane fuel cells (PEMFC). Besides, two 3-cell PEMFC stacks, one per each coating material, have been formed. The migration of metal cations toward both the gas diffusion layers (GDL) and catalyst layers have been analyzed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), after 100 h of continuous operation of the stacks. Results have shown that the two coatings applied over the Al-plates satisfy the corrosion resistance requirements in the short-term tests performed at the two stacks. Moreover, results obtained from electrochemical polarization tests have revealed that the CrN-coating confers a good corrosion resistance to the Al-based metal plate, achieving values of corrosion potential and corrosion current two orders of magnitude lower than the ones obtained for the Al alloy as-received.
Journal: International Journal of Hydrogen Energy - Volume 35, Issue 20, October 2010, Pages 11489–11498