A parametric study of cathode catalyst layer structural parameters on the performance of a PEM fuel cell

This paper is a computational study of the cathode catalyst layer (CL) of a proton exchange membrane fuel cell (PEMFC) and how changes in its structural parameters affect performance. The underlying mathematical model assumes homogeneous and steady-state conditions, and consists of equations that include the effects of oxygen diffusion, electrochemical reaction rates, and transport of protons and electrons through the Nafion ionomer (PEM) and solid phases. Simulations are concerned with the problem of minimizing activation overpotential for a given current density. The CL consists of four phases: ionomer, solid substrate, catalyst particles and void spaces. The void spaces are assumed to be fully flooded by liquid water so that oxygen within the CL can diffuse to reaction sites via two routes: within the flooded void spaces and dissolved within the ionomer phase. The net diffusive flux of oxygen through the cathode CL is obtained by incorporating these two diffusive fluxes via a parallel resistance type model. The effect of six structural parameters on the CL performance is considered: platinum and carbon mass loadings, ionomer volume fraction, the extent to which the gas diffusion layer (GDL) extends into the CL, the GDL porosity and CL thickness. Numerical simulations demonstrate that the cathode CL performance is most strongly affected by the ionomer volume fraction, CL thickness and carbon mass loading. These results give useful guidelines for manufactures of PEMFC catalyst layers.