کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1281081 | 1497685 | 2006 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Plasma-nitrided austenitic stainless steel 316L as bipolar plate for PEMFC Plasma-nitrided austenitic stainless steel 316L as bipolar plate for PEMFC](/preview/png/1281081.png)
Stainless steel bipolar plates for the polymer electrolyte membrane (PEM) fuel cell offer many advantages over conventional machined graphite. Austenitic stainless steel 316L is a traditional candidate for metal bipolar plates. However, the interfacial ohmic loss across the metallic bipolar plate and membrane electrode assembly due to corrosion increases the overall power output of PEMFC. Plasma nitriding was applied to improve the surface performance of 316L bipolar plates. A dense γNγN phase layer was formed on the surface. Polarization curves in the solution simulating PEMFC environment and interfacial contact resistance were measured. The results show that the corrosion resistance is improved and the interfacial contact resistance (ICR) is decreased after plasma nitriding. In comparison with the untreated 316L, the ICR between the carbon paper and passive film for the plasma-nitrided 316L decreases at the same condition and lowers with increasing pH value.
Journal: International Journal of Hydrogen Energy - Volume 31, Issue 13, October 2006, Pages 1874–1878