کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1281976 | 1497538 | 2013 | 13 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Development of CMS/Al2O3-supported PPO composite membrane for hydrogen separation Development of CMS/Al2O3-supported PPO composite membrane for hydrogen separation](/preview/png/1281976.png)
A novel composite membrane consisting of a poly(phenylene oxide) (PPO) selective layer and a CMS/Al2O3 substrate was fabricated by a spin-coating method. This new class of PPO/CMS/Al2O3 multilayer composite membranes showed an H2 permeability of 134 Barrer, two times greater than that for the corresponding self-supported PPO polymeric membrane. High selectivities for H2/CH4 and H2/N2 of 31.8 and 37.1, respectively, were also obtained with this composite membrane. According to field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) observations, using the CMS/Al2O3 material as the substrate provided a smooth surface for the support of the PPO selective layer and increased the roughness from the top to bottom surfaces. The effects of the substrate materials on the permselectivity of the resulting membrane were also investigated.
► High performance of hydrogen permselectivity was obtained from multilayer nanocomposite membrane.
► The multilayer nanocomposite membrane was consisting of a PPO selective layer and a CMS/Al2O3 substrate layer.
► The permeability of multilayer composite membrane is two times greater than PPO membrane.
Journal: International Journal of Hydrogen Energy - Volume 38, Issue 7, 7 March 2013, Pages 3092–3104