In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cells

Water content and dynamics were characterized and compared in situ by simultaneous neutron and optical imaging for three PEM fuel cell flow fields: parallel, serpentine, and interdigitated. Two independent sets of images were obtained simultaneously: liquid water dynamics in the flow field (channels and manifolds) were recorded by a digital camera through an optical window, while the through-thickness integrated water content was measured across the cell area by neutron imaging. Complementary data from the concurrent images allowed distinguishing between the water dynamics on the cathode and the anode side. The transient water content within the cell measured using neutron imaging is correlated with optical data as well as with temporal variations in the cell output and pressure differentials across the flow fields. Water dynamics on both the cathode and anode side were visualized and discussed.The serpentine cell showed stable output across the current range and the highest limiting current. Parallel and interdigitated cells exhibited substantially higher water contents and lower pressure differentials than the serpentine. Anode flooding significantly impeded their performance at high current. At moderate current, cell output correlated with the changes in water distribution in the cathode flow field rather than with the variations in the overall water content. Performance of the interdigitated cell was similar to the serpentine one in spite of the vastly different water contents.The cell's water-content response to a step-change in current revealed three distinct stages of water accumulation. Flow field configuration greatly affected both the amount of water accumulated in the cell and the duration of each stage.