Surface treatments with perfluoropolyether derivatives for the hydrophobization of gas diffusion layers for PEM fuel cells

In the present work, preliminary results of different hydrophobic surface treatments for gas diffusion layer (GDL) for PEM fuel cells are presented. This hydrophobic coating consists of new perfluoropolyether (PFPE) derivatives, in comparison to standard polytetrafluoroethylene (PTFE) dispersions. Experimental conditions for an efficient coating of fluoropolymers onto carbon clothes were explored by wet chemical methods.The GDLs obtained were tested in a single fuel cell at the lab scale. The cell testing was run at two temperatures (60 °C and 80 °C) with a relative humidity (RH) of the feeding gases of 80/100%, hydrogen/air respectively.The new PFPE coatings measurably improve the cell performances, and this effect is more evident at 60 °C with respect to 80 °C.

► Different hydrophobic surface treatments for gas diffusion layer.
► Perfluoropolyether (PFPE) derivatives instead of polytetrafluoroethylene (PTFE).
► The application procedure is simple and user-friendly.
► Low temperature sintering cycle.
► Sensibly improve the cell performance.