Layered double hydroxide/polyethylene terephthalate nanocomposites. Influence of the intercalated LDH anion and the type of polymerization heating method

Conventional and microwave heating routes have been used to prepare PET–LDH (polyethylene terephthalate–layered double hydroxide) composites with 1–10 wt% LDH by in situ polymerization. To enhance the compatibility between PET and the LDH, terephthalate or dodecyl sulphate had been previously intercalated in the LDH. PXRD and TEM were used to detect the degree of dispersion of the filler and the type of the polymeric composites obtained, and FTIR spectroscopy confirmed that the polymerization process had taken place. The thermal stability of these composites, as studied by thermogravimetric analysis, was enhanced when the microwave heating method was applied. Dodecyl sulphate was more effective than terephthalate to exfoliate the samples, which only occurred for the terephthalate ones under microwave irradiation.

Conventional and microwave heating routes were used to prepare PET–LDH (polyethylene terephthalate–layered double hydroxide) composites with 1–10 wt% LDH by in situ polymerization. To enhance the compatibility between PET and the LDH, terephthalate or dodecyl sulphate was previously intercalated into the LDH. The microwave process improves the dispersion and the thermal stability of nanocomposites due to the interaction of the microwave radiation and the dipolar properties of EG and the homogeneous heating.Figure optionsDownload as PowerPoint slideHighlights
► LDH–PET compatibility is enhanced by preintercalation of organic anions.
► Dodecylsulphate performance is much better than that of terephthalate.
► Microwave heating improves the thermal stability of the composites.
► Microwave heating improves as well the dispersion of the inorganic phase.