کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1333086 | 979064 | 2011 | 8 صفحه PDF | دانلود رایگان |
The effects of the concentration of NaOH on the formation and transformation of various titanate nanostructures were studied. With increasing NaOH concentration, three different formation mechanisms were proposed. Nanotubes can only be obtained under moderate NaOH conditions, and should transform into nanowires with prolonged hydrothermal treatment, and their formation rate is accelerated by increasing NaOH concentration. Low concentration of NaOH results in the direct formation of nanowires, while extra high concentration of NaOH leads to the formation of amorphous nanoparticles. Adsorption and photocatalysis studies show that titanate nanowires and nanotubes might be potential adsorbents for the removal of both heavy metal ions and dyes and photocatalysts for the removal of dyes from wastewater.
The morphologies of the titanates depend deeply on the concentration of NaOH. With increasing NaOH concentration, three different formation mechanisms were proposed. The application of these titanate nanostructures in the wastewater treatment was studied.Figure optionsDownload as PowerPoint slideResearch highlights
► Effect of NaOH concentration on the structures of various titanates was reported.
► Three different formation mechanisms were presented with increasing NaOH concentration.
► Various titanates were used as adsorbents/photocatalysts in wastewater treatment.
Journal: Journal of Solid State Chemistry - Volume 184, Issue 3, March 2011, Pages 712–719