کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1396009 | 984153 | 2011 | 9 صفحه PDF | دانلود رایگان |
Mats of randomly oriented nanosized filaments, prepared by electrospinning wool keratin/polyamide 6 blends in formic acid, were evaluated as adsorbents of Cu2+ ions. The adsorption capacity was evaluated as a function of the nanofibre composition, specific surface area, initial metal ion concentration, contact time and pH of the solution. The adsorption tests revealed that keratin-based nanofibres highly adsorb Cu2+ ions and the adsorption capacity increases with increasing the specific surface area of the nanofibre mats. The maximum adsorption capacities for nanofibre mats containing 50%, 70% and 90% (wt.%) of keratin were found to be 61.7 (mg/g), 90 (mg/g) and 103.5 (mg/g), respectively. The Cu2+adsorption onto the keratin rich nanofibres is highly pH-dependent and the optimum pH was found above the isoelectric point of keratin. The experimental data fit the pseudo second-order kinetic model. Infrared analysis demonstrated the formation of complexes between Cu2+ ions and keratin that involve terminal free carboxyl groups of the protein.
Figure optionsDownload as PowerPoint slideHighlights
► Keratin-rich nanofibres were prepared electrospinning keratin/PA6 blend solutions.
► Blend nanofibres had mean diameters in the range between 230 and 130 nm.
► The keratin-based nanofibre mats were tested as adsorbents for copper (II) ions.
► Nanofibre mats containing 90% of keratin show an adsorption capacity of 103.5 mg/g.
► The keratin-based adsorption performances are better than conventional wool fabric.
Journal: European Polymer Journal - Volume 47, Issue 9, September 2011, Pages 1756–1764