کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1399436 | 1501379 | 2014 | 9 صفحه PDF | دانلود رایگان |
• Initiation and first stages of microcrack growth in bitumen is observed by AFM.
• Microcracks only occur in, and propagate through, the elliptical domains.
• Higher loading levels lead to complete breakup of domains into lamellar fragments.
• Fractured fragments align and orient perpendicular to the loading direction.
For the first time the initiation and early stages of damage and microcrack growth in bitumen under mechanical loading conditions have been observed on the micrometer length scale by atomic force microscopy (AFM). Bitumen films have been applied on flexible substrates. Tensile loading of the substrate leads to straining of the substrate itself as well as the bitumen film that has been attached to it. The surface microstructure of the bitumen film has been studied with AFM for three loading levels: no loading, moderate (5% strain) and high loading (10% strain) conditions. The initiation and onset of propagation of microcracks have been observed for the moderately loaded specimen. It is found that damage in the shape of crazes and cracks does only occur in one of the two microstructural phases of bitumen, i.e. in the ellipse-shaped domains. Subsequent application of higher loading levels leads to complete embrittlement and fragmentation of the elliptical domains into lamellar structures which tend to align and orient in a direction perpendicular to the direction of loading.
Figure optionsDownload as PowerPoint slide
Journal: European Polymer Journal - Volume 56, July 2014, Pages 17–25