Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

• The performance comparison of nanocomposite WPU/CNCs prepared via different ways.
• Nanocomposites WPU/CNC were investigated by FTIR, SAXS and mechanical properties.
• Regarding of interactions between the CNC’s and WPU in the different nanocomposites.

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.

Figure optionsDownload as PowerPoint slide