Effect of copolymer architecture on the response of pH sensitive fibers based on acrylonitrile and acrylic acid

Copolymers of acrylonitrile and acrylic acid with high acrylic acid feed ratio of 43 mol% were synthesized using free radical polymerization. The architecture of copolymers was modified by regulating the dosing of more reactive comonomer-acrylic acid. 13C NMR analysis confirmed that two copolymers – one (A) containing enriched blocks of individual monomer-residues (architecture close to a block copolymer) and the second (B) having nearly random distribution of the comonomers, could be successfully synthesized. The resultant acrylic acid content was determined to be nearly 50 mol% for both the copolymers. These copolymers were converted to fine fibers by solution spinning in DMF-water system, drawn in coagulation bath, and annealed at 120 °C for 2 h. The fibers were evaluated for pH response behavior, mechanical stability, and retracting stresses. The fiber A was found to have significantly higher swelling percentage (3300–3700%), faster response, and higher stability to repeated cycling compared to fiber B. Also, Fiber A showed lower thermal shrinkage, better mechanical properties during swelling and higher retracting forces during deswelling. These results indicate that the copolymer with enriched block architecture could possibly form segregated domain structure with acrylic acid domains facilitating enhanced pH response while acrylonitrile domains providing physical crosslinks for stronger mechanical strength. The study suggests that above approach may be more useful than chemically cross-linked gel rods in producing artificial muscles with faster response and good mechanical properties.